Do-it-yourself sketches of houses made from ceiling tiles. What crafts can be made from leftover ceiling tiles? DIY snowman made from ceiling tiles

Irina Kononova

like this Christmas tree can be done at home with your child in a few evenings and without much expense

You will need the following materials:

Smooth white ceiling tiles;

Acrylic paint;

Light green tinting paste. dark green, blue colors;

Universal polymer adhesive;

Stationery knife;

Thin elastic wire;

A set of beads or old beads.

Making patterns for parts paper Christmas trees.

Cut out four symmetrical details:

1 - top Christmas trees(bottom part,

2 - top Christmas trees(top piece);

3 - bottom Christmas trees(bottom part);

4 - bottom Christmas trees(top piece)

and one detail - "snowdrift".

Laying out the details on the sheet ceiling tiles on the reverse side and trace it with a ballpoint pen.

Using a stationery knife, cut out the parts Christmas trees made from ceiling tiles

Let's start painting.

Paint some green paint (you will need no more than a teaspoon). We will use it to paint the front side of the parts.

First we paint the sides (thickness tiles)

Then we paint the front side of the parts.

Now we dilute light green and blue paints (you will need even less of them)

We paint the upper parts with light green paint. Christmas trees

We paint with blue paint "snowdrift". Let the paint dry.

We collect Christmas tree.

With glue (a small drop is enough) connect the lower parts Christmas trees(top and bottom). Let the glue dry a little.

To the bottom Christmas trees glue on the top piece. Use a small amount of glue (one drop in the center of the part).

Glue the top piece onto the top Christmas trees.

Paste Christmas tree on"snowdrift". Let the glue dry well.

Decorate Christmas tree

We make small staples from cut wire.

We thread the wire into the beads.

We pierce Christmas tree through a staple with a bead.

We bend the ends of the wire from the wrong side

For Christmas tree garlands we place the beads next to each other. You can string several beads on one wire.

We place balloons and other decorations throughout Christmas tree in no particular order.

So I'm ready Christmas tree.

like this Christmas tree Can be attached to a wall or any flat surface. For this it is enough to "snowdrift" on the wrong side, stick two strips of thin double-sided tape and glue Christmas tree in the place you need.

You can glue a small magnet and hang it on the refrigerator

HAPPY NEW YEAR!

Publications on the topic:

Collective work "The clouds woke up with a sunny smile" made from ceiling tiles. Master class A cloud woke up with a sunny smile.

Good day, dear colleagues and friends! I bring to your attention the master class “Chicken for a walk” Before you start working.

Goal: Transfer of experience through direct and commented demonstration of the sequence of actions, techniques, forms of pedagogical activity during.

Autumn! The sweet smell of apples, An unprecedented harvest, There are many of them under the canopy of apple trees, Bend down and pick. I really enjoy this wonderful time.

The New Year is just around the corner to keep your child occupied on cold winter evenings and prepare for the upcoming holiday. I offer a master class.

Who didn’t enjoy making paper crafts as a child, especially if your parents were present with you?

They cut out snowflakes, folded cockerels and boats - a special chic. Back then they didn’t know that this creativity was called origami. It would seem that everything is clear in the name: ceiling tiles - put them on top. But no!

Composition of tiles suitable for crafts

Who, after renovation, did not collect the remains of tiles, baseboards, their pieces and trimmings, glue? And it’s a pity to throw it away - what if it comes in handy, but suddenly it may never come. Perhaps our instructions will allow you to take a fresh look at the used material, and your children will enjoy communication and joint creativity with you on New Year's Eve.

For clarity, we offer several photos showing handmade crafts:

It is necessary that children's crafts hang on the Christmas tree in the most visible place, because the main thing is not the price of the toys, but the importance of joint production.

cuts well with a knife or scissors, paints and glues well;
Household packaging foam allows you to produce voluminous crafts and various gizmos;
Combine tiles of different thicknesses in your crafts.

Making various crafts

Let's start with simple crafts, like in mathematics - from simple to complex.

Christmas tree pendants

The New Year is coming, we are preparing Christmas tree pendants or toys:

Trace the outline of a heart, bell, tulip, star or snowflake with a pencil, and use a paper knife or just scissors to cut out your outline sketches;
They should be fairly simple. Consider attaching crafts. As an option, loops of thread will be glued to the toy with glue, or holes will be made in the crafts and threads will be pulled through them;
Help young children cut out pictures. Do not make complex figures, so as not to discourage either yourself or your children;

, from which the blanks are prepared, let it lie in wait;
From simple colored paper, various candy foils, sparkles, rhinestones, beads, we will prepare a whole heap of decorations for our drawings;
We attach and decorate tile crafts with PVA glue: cutouts from colored paper, sparkles, rhinestones, beads;
You can sit and paint everything. It is preferable to use gouache, tempera, felt-tip pens or artistic oil paints. If you have time to dry them, oil paints take a long time to dry;
Pencils, even the softest ones, do not draw, but press through the material of the blanks; it is not advisable to paint with them;
For the Christmas tree, of course, it is better to prepare figures of Father Frost, Snow Maiden and snowflakes. They are distributed either one at a time in different places, or garlands are prepared from them.

Attention: To avoid melting of the foam, the paint composition should not contain acetone or other active substances.

Volumetric Christmas tree

A voluminous Christmas tree made from ceiling tiles is an original idea and is very easy to prepare:

You only need 10 pieces or more of foam, and a circle is drawn on each. The principle of the nesting doll is from a large circle to a small one. A large circle is the base, a small circle is the top, and inside there is a pyramid made of circles of different circumferences;
We cut teeth on each contour of the circle, imitating branches with needles;
A fairly stiff wire or a thin metal rod is taken onto the tree rod, a baked electrode can be used, and one end is inserted into the stand;
The mugs are painted green and strung onto a rod from below.

Valentines

Have you tried making your own Valentine's Day cards and surprising your loved ones? Everything starts for the first time - so let's try to experiment.

The Valentine card is cut out in the shape of hearts, painted as desired, backed with paper, glitter, foil, decorated, and smeared with transparent glue. Manicure glitter is poured onto these artistic spots of glue, ribbons and butterflies are glued;
You can make a postcard in the form of a book. Two identical square or rectangular polystyrene foam plates go on it; the edges are fastened with a paper strip glued to both halves;
Letters and numbers for teaching reading and counting to small children are cut out from ceiling tiles;
Various parts to collect educational toys and build entire cities with cars, trees, flowers;
Various details are glued onto a large sheet of cardboard, and a picture of the city, a swamp with reeds and frogs is created, Vasnetsov’s paintings are recreated, and warning signs about danger on the roads are made.

Three-dimensional paintings

Cut-out paintings made from the remains of foam tiles can be compared to wood carving - and this is aerobatics. A sharp stationery knife is used to remove all excess and leave a drawing previously applied with a felt-tip pen to the tile, or pressed from paper with a sharp pencil;

The reverse side is either covered with colored paper and the drawing is hung on the wall on a loop, or a stand or leg is prepared for it.

Attention: The walls of schools, gymnasiums, and lyceums are decorated with such crafts.

House layouts

From the leftovers you can make houses of various sizes and complexity with your own hands. All parts of the house are made separately: walls, roof, doors, windows and much more.

They cut out interior items, furniture and household appliances from tiles.
Using scraps of fabric, imitation curtains, upholstery and other home textiles are made.
All parts are painted and glued together with transparent glue. The process is quite labor-intensive, but very exciting.

You can create copies of architectural monuments or simply beautiful buildings. The cost of the raw materials is quite low, but the result is impressive.

Flying models

Many exemplary dads, who not only love to launch airplanes themselves, but also prepare flying models with their children and enjoy their flights, make crafts from foam plastic.

They are more reliable than a paper kite, and watching their flight is much more interesting. A glider made from ceiling tiles turns out to be very light, maneuverable, well controlled, floats on the air flow and flies for a long time.

To make it you need to prepare:

Ordinary tiles without a relief pattern;
PVA glue;
4x4 slats made of pine;
Buttons, clothespins;
Pins or needles;
Templates, pens, markers;
Stationery knife, fine sandpaper on a block, plasticine.

Responsible work requires a scientific approach. It is necessary to make a drawing and make airframe templates:

A printout of the drawing is pasted onto the cardboard, the template is applied to the tile, with buttons you need to attach and trace the wing, stabilizer and keel;
Remove the templates, then use a medical scalpel or a stationery knife, allowing 1-2 mm, to cut out the blanks;

Attention: Do not touch the workpiece lines, remember the allowances.

We begin processing the workpieces, having previously marked the boundary lines;
A profile is given to the stabilizers and the wing using a sanding block, back and forth translational movements;
Try not to spoil the part; process with smooth movements. The profile can be given with a heated iron, but this requires skills;
Did you get the parts in the right shape? Start gluing with PVA glue.

Warning: Do not use moment glue, which will turn the plane into an amorphous substance similar to porridge.

A rail of 18-25 centimeters on both sides is smeared with glue and placed for 5 minutes to saturate the wood;
The stabilizer and wing are coated along the center line with glue, fastening is done with clothespins, the keel is attached to the wing with pins along the same center line;
After 5-8 hours, the structure dries, settles, and you can begin setting up the model;
The glider is launched from the hand, and its flight properties are visually determined;

Tip: Your glider rises sharply - place a piece of plasticine on the nose. It dives - sculpt plasticine onto the tail or bend the stabilizer a little, which will balance the structure.

Now you know what else, besides cladding, ceiling tiles are good for. Of course, this is only a small part of what can be invented and manufactured. Try inviting your children to come up with their own crafts, and you will be surprised by their imaginations and desires.

Nowadays, there is a huge variety of building materials, the remains of which we most often throw away. After the renovation, there are a lot of pieces and scraps left that can be used for all kinds of souvenirs and to make useful things for the house.

Most people have a creative streak, and especially if you have children, there are an endless number of interesting crafts you can make with them.

Foam plastic as a material for crafts

Remains of foam ceiling tiles are an excellent material for creativity.. It is easy to cut with a knife or scissors, durable, tolerates coloring very well, and glues perfectly. Therefore, just like from simple polystyrene foam, crafts from ceiling tiles can be made with your own hands easily and simply (see).

Of course, more voluminous items can be made from household foam, which is usually used to line household appliances (see). Because it is thick. In those cases, you can even cut out a ball or an egg using a sharp blade. Flatter tiles provide no less opportunities for creativity. Let's remember our childhood together and just figure out what can be made from the remnants of ordinary ceiling tiles.

DIY crafts from foam tiles

The simplest type of craft that can be made from ceiling tiles is pendants or Christmas tree decorations.

New Year decoration

You will have fun and useful time with your children if you start making this kind of jewelry.

Using a stationery knife or just scissors, the figures are cut out according to the outline previously drawn on the tile. These could be hearts, bells, flowers, stars or snowflakes.
Do not immediately take on too complex drawings; to begin with, these can be simplified forms. If the children are small, help them by cutting out the main figures yourself.
Now, using PVA glue, you can stick on any designs made from colored paper, glitter, rhinestones or beads. You can draw pictures on the blanks.

Note! Keep in mind that the paint should not contain acetone or other active substances, as the foam will melt from them. It is best to use gouache, tempera, felt-tip pens or artistic oil paints. However, it is worth noting that oil paints take quite a long time to dry. Pencils will not work, as they will only push the material, but not draw.

Festive, especially New Year's decorations - pendants are made to your taste, then a loop is glued to each one. For example, simplified figures of Santa Claus and Snow Maiden, snowflakes, etc. They are then painted and, after drying, hung on the Christmas tree or made into a garland.

Another thing you can make from ceiling tiles is a three-dimensional Christmas tree for the New Year.

To do this, take about 10 pieces of foam plastic (more is possible), and draw a circle on each one. Moreover, the first circle is the largest, and all subsequent ones are smaller than each previous one. And so on - until the smallest. The largest will be the bottom, and the smallest will be the top.
Now on each circle, teeth are cut along the contour. These will be the branches with the needles of the future Christmas tree.
Next, we take a fairly stiff wire, one end of which we insert into a pre-prepared piece - a stand, bending the tip from below.
Mugs with teeth need to be painted green and, after drying, we string them onto a wire frame (the future trunk of the Christmas tree). We start from the bottom, that is, from the largest circle. And so on in order, to the very top.

The Christmas tree is ready. All that remains is to decorate it according to your taste and desire.

Cards and valentines

Greeting cards or valentines are another type of DIY craft.

Valentine cards are cut out in the shape of hearts, then painted to your liking.
The sparkles applied to them will look very original. This is done very simply. After the paint has dried, the finished heart is smeared with transparent glue in the right places. PVA or office glue is best. Then, until it dries, these places are sprinkled with small glitter. Manicure glitters, which are sold in haberdashery stores, are very suitable for this purpose.

It is better to make postcards in the form of a book. To do this, two identical halves of polystyrene foam are cut off, then fastened along one edge with a glued paper strip. The card can now be opened and closed.

Educational toys

Letters and numbers are useful crafts for your child’s development that you can make with him from ceiling tiles. You can cut out the whole alphabet, which, by the way, will be perfect for a child if he is learning to read and count. You can cut out letters for a greeting, such as happy birthday, for a member of your family and hang this phrase on the wall. This will be a pleasant and original surprise.

More complex crafts - three-dimensional pyramids, houses, cars, etc.

Individual parts are cut out (walls, roof), then glued together into a finished product. For the car, they cut out body parts and wheels, then glue everything together in the same way.

Note! Thick PVA glue is best suited for such purposes, since the paint may lie unevenly on office glue after it dries.

This way you can build an entire city. To do this, take a large thick sheet of cardboard, then glue each fence, house, car and other parts to it.

Cutting crafts

Cut-out crafts made from foam leftovers look very original.

As we understand, this is only a small part of the ideas that can be implemented even by those who are not strong in creative activities (see). In fact, there are a lot of options for crafts made from ceiling tiles that anyone can make. The main thing is desire and imagination. Then you will spend time usefully for yourself and your loved ones.

Victoria Zhorova

I've been very interested lately production of group design elements from ceiling tiles, covering them with a mixture of gouache and PVA glue.

This experience was useful to me when registration music hall for festive events.

In my master class I want to tell you the technology manufacturing.

We will need:

- ceiling tiles(not foam);

Simple pencil;

Stationery knife;

Paint brush;

PVA glue;

A jar for mixing paint and glue;

- tile adhesive.

To begin with, I choose a drawing that suits me (coloring book).

I enlarge the image to the desired size. I use the method of drawing by cells, familiar to me since childhood.

Then I transfer the drawing to tiles, considering elements, which will protrude, creating a kind of multi-layering.

After everything elements are transferred to tiles, I cut them out using a utility knife.

I mix the desired paint with PVA glue in the ratio 1 :1 (you can add a little water if necessary). You should have the consistency of liquid sour cream. I color everything elements.

After complete drying, I assemble them together using tile adhesive.

Data elements served me well registration by September 1. The height was about 150 cm.

Publications on the topic:

Master class on making a sun from foam ceiling tiles. I present to you a master class on making a sun from foam plastic.

"Kite" from ceiling tiles. Master Class. Good day, dear colleagues! It's winter now and it's minus twenty-eight outside.

In anticipation of the New Year, we continue to come up with decorations for the home. For work, prepare: ceiling tiles, a stationery knife, a simple one.

Leaf fall, leaf fall, Yellow leaves are flying. Yellow maple, yellow beech, Yellow circle of the sun in the sky. Yellow yard, yellow house. The whole earth is yellow all around.

Ceiling tiles are an excellent material for creativity. It is easy to cut, can be painted and adheres well. Having assessed the qualities and capabilities.

In a kindergarten group, the spatial developing environment needs to be constantly updated. I have been using ceiling tiles in my work for a long time.

You can make unique decorations and crafts for the New Year from ordinary foam ceiling tiles. The article contains examples of these and a description of how to do them.

Often there is a desire to decorate your home with holiday crafts. This ritual is especially important on the eve of the New Year. After all, it is for this celebration that people expect some kind of miracle. Children expect magic first, so they try the hardest.

Crafts can be made from various materials, and there is a lot of information about this online. Very original Christmas tree decorations are made from ordinary foam tiles that are glued to the ceiling. Next, let's look at examples of New Year's decorations made of polystyrene foam in detail.

How to make a white fairy house from ceiling tiles: diagrams, description, photos

To get started, first of all, stock up on free time. This process will require patience, skill, and desire. And the kids will be delighted with this work.

Prepare materials and tools in advance:

scissors, marker, glue
tile, sharp knife
felt-tip pens, gouache, colored paper, foil

The house can be made in one plane, or rather, simply cut out a mold for the roof, front panel with a window and a pipe on the roof from foam plastic. Or you can build a whole 3-D model of a real fairy-tale gingerbread house or Baba Yaga’s hut.

For the second option do the following:

Cut out four walls of the house from polystyrene foam
Two identical roof parts
Two isosceles triangles for the front and back of the attic part of the building
Then carefully make openings where the windows and doors will be
In the future, you can decorate them with colored paper and make curtains inside
Glue all finished parts of the product
Cut the pipe and glue it to the roof
To make the house more fun, you can also make a whole courtyard
There, make a Christmas tree in the yard (again, from polystyrene foam)
Use felt-tip pens and paint to decorate it and draw toys on the branches.

How to make snowflakes from ceiling tiles: cutting templates, photos

What would a New Year's holiday be without beautiful white snowflakes of different shapes? They are cut out not only from paper, but from ceiling tiles. It’s just worth considering that you can’t fold polystyrene foam like paper so that the snowflake turns out strictly symmetrical.

To create neat products you will need patterns (templates that you can make from cardboard). Such patterns are subsequently not difficult to transfer to the material using a regular felt-tip pen; you just need to outline the contours.

You will see a number of such examples of patterns in the image below.

They can be printed on a printer, and then carefully cut out and glued to stronger paper. Again, cut them out, after which you can safely transfer them to the foam tiles.

Now cut out the intricate patterns of snowflakes on the foam with a sharp knife. Hang the finished products on the Christmas tree or decorate them with garlands and chandeliers in the house.

IMPORTANT: When you cut out snowflake figures from ceiling tiles, keep in mind that the material is brittle and perform the process carefully, with maximum accuracy.

How to make a Christmas tree from ceiling tiles?

If the tree is already in the house, then the children know that gifts will definitely appear under it for the New Year. But there are unexpected situations when adults did not have time to buy the most important symbol of the New Year. In this case, don’t be upset; a nice Christmas tree will turn out from different sizes of ceiling tiles.

True, the product will require thicker tiles. In addition, you need to collect more squares, then the artificial beauty will come out large.

Fold the squares into a pyramid, as in the picture below. Glue a small top on top.

Christmas tree - do it yourself

IMPORTANT: Any decoration for the Christmas tree will do. Silver rain, garlands, beads will be very useful.

How to make Christmas tree decorations from ceiling tiles?

As Christmas tree decorations, you can use a variety of figurines with a suitable New Year theme.

Santa Claus with gifts

Deer - do it yourself

How to make decorations from ceiling tiles?

From one ceiling tile you can cut out several dozen small decorations that are hung on the front door or other places on the eve of New Year's celebrations.

Anyone who knows how to draw well will, without much effort, beautifully decorate products using felt-tip pens, gouache and other auxiliary materials. To keep them on the garlands, Christmas tree, stars, bells, snowflakes, tie threads.

Beautiful decorations for the New Year

IMPORTANT: Follow safety rules. After all, polystyrene foam melts and easily ignites when exposed to high temperatures and fire. Therefore, it won’t hurt you to explain to your child that you can’t play around with fire to avoid a fire.

How to make flowers from ceiling tiles?

Flowers, like snowflakes, must be cut out after you transfer the design from the template to the foam. To make them different colors, decorate them with gouache. A varied pattern will be created on the surface of the flowers, as there are interesting patterns on the ceiling tiles.

How to make a snowman from ceiling tiles?

Using the appliqué technique, make a snowman from ceiling tiles. Then place it under the tree on a small stand made of another tile so that it does not fall. A cheerful snowman will delight you and your children and charge you with positivity throughout the winter holidays.

Snowman for New Year's holidays made of ceiling tiles

How to make Santa Claus from ceiling tiles?

You will get a cute Santa Claus on the Christmas tree in the form of a toy if you cut him out according to a template from ceiling tiles. In addition, for a beautiful design, you can dress him in a hat or a fur coat made of red fabric. And paint your face with paints. Make the beard, mustache, and edges out of white plush. Progress:

Cut out the foam pieces
Start by assembling the bottom of the tank
Glue all the other parts of the craft together
Carefully color it with felt-tip pens and paint.

Polystyrene foam is an excellent material for this type of craft. If you have imagination, you can come up with various toys for the New Year yourself. Thus, please yourself and your little family members by making them together.